能用在通达信上的QSDD（趋势顶底）介绍
能用在通达信上的QSDD（趋势顶底）
80,COLOR996699;
20,COLORGREEN;
10,COLORCC6633,LINETHICK2;
90,COLOR9966FF,LINETHICK2;
{
50,COLORRED;
FILLRGN(1,20,80),COLOR222222;
FILLRGN(1,90,100),COLOR000068;
FILLRGN(1,79,90),COLOR663366;
FILLRGN(1,10,20),COLOR666600;
FILLRGN(1, 0,10),COLOR663300;
}
A:=MA(-100*(HHV(HIGH,34)-CLOSE)/(HHV(HIGH,34)-LLV(LOW,34)),19),COLORRED;
B:=-100*(HHV(HIGH,14)-CLOSE)/(HHV(HIGH,14)-LLV(LOW,14));
D:=EMA(-100*(HHV(HIGH,34)-CLOSE)/(HHV(HIGH,34)-LLV(LOW,34)),4),LINETHICK2;
长期线:A+100,COLOR9900FF;
短期线:B+100,COLOR888888;
中期线:D+100,COLORYELLOW,LINETHICK2;
{见顶:(长期线>85 OR REF(长期线,1)>85 ) AND (CROSS(中期线,短期线) OR CROSS(REF(中期线,1),REF(短期线,1)) )AND CROSS(长期线,短期线);
}
见顶:(REF(中期线,1)>85 AND REF(短期线,1)>85 AND REF(长期线,1)>65) AND CROSS(长期线,短期线) ;
顶部区域:(中期线<REF(中期线,1) AND REF(中期线,1)>80) AND (REF(短期线,1)>95 OR REF(短期线,2)>95 ) AND 长期线>60 AND 短期线<83.5
AND 短期线<中期线 AND 短期线<长期线+4;
顶部:=FILTER(顶部区域,4);
{DRAWICON( 见顶, 108, 2 );}
底部区域:(长期线<12 AND 中期线<8 AND (短期线<7.2 OR REF(短期线,1)<5) AND (中期线>REF(中期线,1) OR 短期线>REF(短期线,1)))
OR (长期线<8 AND 中期线<7 AND 短期线<15 AND 短期线>REF(短期线,1)) OR (长期线<10 AND 中期线<7 AND 短期线<1) ;
STICKLINE( {见顶 OR} 顶部,99,103,20,1 ),COLORRED,LINETHICK2;
STICKLINE( 底部区域,-4,0,22,0 ),COLORGREEN;
低位金叉:长期线<15 AND REF(长期线,1)<15 AND 中期线<18 AND 短期线>REF(短期线,1) AND CROSS(短期线,长期线) AND 短期线>中期线
AND (REF(短期线,1)<5 OR REF(短期线,2)<5 ) AND (中期线>=长期线 OR REF( 短期线,1)<1 );
STICKLINE( 低位金叉,0,5,11,0 ),COLORRED;
声明一点：因本人不用通达信，没经检验不知能否通过。资料源于网上收集。
条件选股：备份
JRH:=HHV(C,2);
JRL:=LLV(C,2);
MA3:=MA(CLOSE,3);
YTSL:=(3*CLOSE+LOW+OPEN+HIGH)/6;
VAR1:=(CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2));
VAR2:=(REF(VAR1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR3:=(REF(VAR2,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR4:=(REF(VAR3,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR5:=(REF(VAR4,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR6:=(REF(VAR5,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR7:=(REF(VAR6,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR8:=(REF(VAR7,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR9:=(REF(VAR8,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARA:=(REF(VAR9,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARB:=(REF(VARA,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARC:=(REF(VARB,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VARD:=(CLOSE<REF(CLOSE,1) AND CLOSE<REF(CLOSE,2));
VARE:=(REF(VARD,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VARF:=(REF(VARE,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR10:=(REF(VARF,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR11:=(REF(VAR10,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR12:=(REF(VAR11,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR13:=(REF(VAR12,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR14:=(REF(VAR13,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR15:=(REF(VAR14,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR16:=(REF(VAR15,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
VAR17:=(REF(VAR16,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2));
VAR18:=(REF(VAR17,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2));
RSV9:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100;
K1:=SMA(RSV9,3,1);
DK1:=K1-REF(K1,1);
GO:=IF(DK1>7 AND REF(DK1,1)<0 AND (DK1-REF(DK1,1))>9,50,0);
MTM:=C-REF(C,1);
DX:=100*EMA(EMA(MTM,6),6)/EMA(EMA(ABS(MTM),6),6);
GOGOGO:FILTER((LLV(DX,2)=LLV(DX,7) AND COUNT(DX<0,2) AND CROSS(DX,MA(DX,2))),5) AND GO=50 OR REF("KDJ.J",1)<0 AND "KDJ.J">0 AND((REF(VARD OR VARE OR VARF OR VAR10 OR VAR11 OR VAR12 OR VAR13 OR VAR14 OR VAR15 OR VAR16 OR VAR17 OR VAR18,1)) AND VAR1);
gd19571
