股资源-股票学习站-学炒股-股票课程-炒股教程-分析选股指标-入门基础知识

 找回密码
 注册昵称

QQ登录

只需一步,快速开始

搜索
    上一主题 下一主题

    [通达信] 「指标」双龙戏轴主图/副图/选股指标 通达信 贴图


        [-----复制链接-----]

    22万

    主题

    22万

    帖子

    14

    精华

    积分
    11040
    楼主
    2024-1-30 10:49:35
    【资料名称】:双龙戏轴主图/副图/选股指标 通达信 贴图介绍
    【资料描述】:

    双龙戏轴主图/副图/选股指标 通达信 贴图

    双龙戏轴,都是抓大波段的,用的蛮好,现在发出来于大家分享,不过现在不用了,现在用升级版了,看大家顶贴的力度吧,要是大家喜欢这个风格的,再把升级版的发出来


    双龙戏轴指标操作要点说明:

    本指标使用环境为大盘处于震荡市、弱市及牛市初期,适合超短线和短线操作,同样也适合波段操作。

    指标最好使用预警,出信号后不马上买票,先快速看信号股形态如何,确定为较好的形态后再结合分时走势,根据分时量价找机会杀入,建议最好是等分时回调之际介入。

    好的信号形态特点:

    1、信号前面的涨停K线和信号时的K线基本都在主图神龙线附近的,神龙线趋势是平缓后上翘较佳。

    2、信号出现时K线如果是穿多均线的较佳,特别是穿60日或120日均线的。穿线时的各均线最好是密集的较佳。

    3、信号出现时K线穿多均线,上方均线越少表明压力就越小,爆发力就越大。

    4、信号出现时K线穿神龙线的,神龙线是平缓或向上运行的较佳。

    5、信号出现时K线处于底部位置,K线底部有底托线强支撑的。

    6、信号出现时的前一天如果是涨停板的,信号当天尽快不去追高买入,如果形态好的可以在次日看情况做低吸。

    7、信号出现时涨幅已经接近涨停板的尽量不去追,如果信号形态是特别好的当日考虑杀入,也可以次日找机会做低吸。

    8、一般情况下信号特点好的信号买入次日基本都会有上涨,至于是做超短还是做短线要具体看情况操作!大盘环境比较差的情况下又不是特好的信号形态建议超短线操作。

    差的信号形态特点:

    1、一波暴涨后从高位极速回落下来出现的信号(高位后信号前面2天都是跌停或大跌的这种),属于弱反弹不参与。

    2、主图中的神龙线趋势是向下的,没有平缓或向上运行的,各短期均线都是凌乱发散的,K线也没有穿神龙线的。

    双龙戏轴主图:
    MA5:MA(CLOSE,5);
    MA10:MA(CLOSE,10);
    MA20:MA(CLOSE,20);
    MA30:MA(CLOSE,30);
    MA60:MA(CLOSE,60);
    MA120:MA(CLOSE,120);
    MAQ:=MA(C,5);
    底托线:LLV(HIGH,30),LINETHICK2, COLOR9932CD;
    {主力成本}
    A:=(3*C+L+O+H)/6;
    X:=(20*A+19*REF(A,1)+18*REF(A,2)+17*REF(A,3)+16*REF(A,4)+15*REF(A,5)+
    14*REF(A,6)+13*REF(A,7)+12*REF(A,8)+11*REF(A,9)+10*REF(A,10)+9*REF(A,11)+8*REF(A,12)
    +7*REF(A,13)+6*REF(A,14)+5*REF(A,15)+4*REF(A,16)+3*REF(A,17)+2*REF(A,18)+
    REF(A,20))/210;
    S2:=SMA(C,3,1);
    S6:=SMA(C,5,1);
    DK:=2*(S2-S6);
    神龙线:EMA(X,13),LINETHICK2,COLORFFCC00;


    {双龙戏轴}
    GY1:=O<MA(C,5) AND C>MA(C,5) AND O<MA(C,10) AND C>MA(C,10) AND O<MA(C,20) AND C>MA(C,20);
    GY2:=O<MA(C,20) AND C>MA(C,20) AND O<MA(C,60) AND C>MA(C,60);
    GY3:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,30) AND C>MA(C,30);
    GY4:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,120) AND C>MA(C,120);
    GY8:=O<MA(C,20) AND C>MA(C,20) AND O<MA(C,120) AND C>MA(C,120);
    GY5:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,60) AND C>MA(C,60);
    GY6:=O<MA(C,30) AND C>MA(C,30) AND O<MA(C,60) AND C>MA(C,60);
    GY7:=O<MA(C,5) AND C>MA(C,5) AND O<MA(C,20) AND C>MA(C,20) AND O<MA(C,30) AND C>MA(C,30);
    ZHGY1:=GY1 OR GY2 OR GY3 OR GY4 OR GY5 OR GY6 OR GY7 OR GY8;
    ZHGY2:=REF(C,2)/REF(C,3)<1.099 AND NOT(REF(C,1)<REF(O,1)AND REF(O,1)/REF(C,1)>1.09
    AND REF(C,1)/O>1.03);

    TP1:=REF(C,3)/REF(C,4)>1.091 AND REF(H,3)=REF(C,3) AND REF(L,3)<REF(O,3);
    TP2:=H/REF(C,1)>=1.041 AND O<REF(C,3);
    XG1:=TP1 AND TP2 AND ZHGY1 AND ZHGY2;
    QP1:=REF(C,4)/REF(C,5)>1.091 AND REF(H,4)=REF(C,4) AND REF(L,4)<REF(O,4);
    QP2:=H/REF(C,1)>=1.041 AND O<REF(C,4);
    XG2:=QP1 AND QP2 AND ZHGY1 AND ZHGY2;
    WP1:=REF(C,5)/REF(C,6)>1.091 AND REF(H,5)=REF(C,5) AND REF(L,5)<REF(O,5);
    WP2:=H/REF(C,1)>=1.041 AND O<REF(C,5);
    XG3:=WP1 AND WP2 AND ZHGY1 AND ZHGY2;
    RP1:=REF(C,6)/REF(C,7)>1.091 AND REF(H,6)=REF(C,6) AND REF(L,6)<REF(O,6);
    RP2:=H/REF(C,1)>=1.041 AND O<REF(C,6);
    XG4:=RP1 AND RP2 AND ZHGY1 AND ZHGY2;
    WUJQ:=XG1 OR XG2 OR XG3 OR XG4;
    DRAWICON(WUJQ,L*0.95,14);
    DRAWTEXT(WUJQ,L*0.91,'双龙戏轴'),COLORFFCC00;


    双龙戏轴副图:
    {双龙戏轴}
    GY1:=O<MA(C,5) AND C>MA(C,5) AND O<MA(C,10) AND C>MA(C,10) AND O<MA(C,20) AND C>MA(C,20);
    GY2:=O<MA(C,20) AND C>MA(C,20) AND O<MA(C,60) AND C>MA(C,60);
    GY3:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,30) AND C>MA(C,30);
    GY4:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,120) AND C>MA(C,120);
    GY8:=O<MA(C,20) AND C>MA(C,20) AND O<MA(C,120) AND C>MA(C,120);
    GY5:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,60) AND C>MA(C,60);
    GY6:=O<MA(C,30) AND C>MA(C,30) AND O<MA(C,60) AND C>MA(C,60);
    GY7:=O<MA(C,5) AND C>MA(C,5) AND O<MA(C,20) AND C>MA(C,20) AND O<MA(C,30) AND C>MA(C,30);
    ZHGY1:=GY1 OR GY2 OR GY3 OR GY4 OR GY5 OR GY6 OR GY7 OR GY8;
    ZHGY2:=REF(C,2)/REF(C,3)<1.099 AND NOT(REF(C,1)<REF(O,1)AND REF(O,1)/REF(C,1)>1.09
    AND REF(C,1)/O>1.03);

    TP1:=REF(C,3)/REF(C,4)>1.091 AND REF(H,3)=REF(C,3) AND REF(L,3)<REF(O,3);
    TP2:=H/REF(C,1)>=1.041 AND O<REF(C,3) AND REF(C,3)/REF(O,3)>1.02;
    XG1:=TP1 AND TP2 AND ZHGY1 AND ZHGY2;
    QP1:=REF(C,4)/REF(C,5)>1.091 AND REF(H,4)=REF(C,4) AND REF(L,4)<REF(O,4);
    QP2:=H/REF(C,1)>=1.041 AND O<REF(C,4) AND REF(C,4)/REF(O,4)>1.02;
    XG2:=QP1 AND QP2 AND ZHGY1 AND ZHGY2;
    WP1:=REF(C,5)/REF(C,6)>1.091 AND REF(H,5)=REF(C,5) AND REF(L,5)<REF(O,5);
    WP2:=H/REF(C,1)>=1.041 AND O<REF(C,5) AND REF(C,5)/REF(O,5)>1.02;
    XG3:=WP1 AND WP2 AND ZHGY1 AND ZHGY2;
    RP1:=REF(C,6)/REF(C,7)>1.091 AND REF(H,6)=REF(C,6) AND REF(L,6)<REF(O,6);
    RP2:=H/REF(C,1)>=1.041 AND O<REF(C,6) AND REF(C,6)/REF(O,6)>1.02;
    XG4:=RP1 AND RP2 AND ZHGY1 AND ZHGY2;
    双龙戏轴:XG1 OR XG2 OR XG3 OR XG4,LINETHICK2,COLORFFCC00;


    双龙戏轴选股:
    {双龙戏轴}
    GY1:=O<MA(C,5) AND C>MA(C,5) AND O<MA(C,10) AND C>MA(C,10) AND O<MA(C,20) AND C>MA(C,20);
    GY2:=O<MA(C,20) AND C>MA(C,20) AND O<MA(C,60) AND C>MA(C,60);
    GY3:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,30) AND C>MA(C,30);
    GY4:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,120) AND C>MA(C,120);
    GY8:=O<MA(C,20) AND C>MA(C,20) AND O<MA(C,120) AND C>MA(C,120);
    GY5:=O<MA(C,10) AND C>MA(C,10) AND O<MA(C,60) AND C>MA(C,60);
    GY6:=O<MA(C,30) AND C>MA(C,30) AND O<MA(C,60) AND C>MA(C,60);
    GY7:=O<MA(C,5) AND C>MA(C,5) AND O<MA(C,20) AND C>MA(C,20) AND O<MA(C,30) AND C>MA(C,30);
    ZHGY1:=GY1 OR GY2 OR GY3 OR GY4 OR GY5 OR GY6 OR GY7 OR GY8;
    ZHGY2:=REF(C,2)/REF(C,3)<1.099 AND NOT(REF(C,1)<REF(O,1)AND REF(O,1)/REF(C,1)>1.09
    AND REF(C,1)/O>1.03);

    TP1:=REF(C,3)/REF(C,4)>1.091 AND REF(H,3)=REF(C,3) AND REF(L,3)<REF(O,3);
    TP2:=H/REF(C,1)>=1.041 AND O<REF(C,3);
    XG1:=TP1 AND TP2 AND ZHGY1 AND ZHGY2;
    QP1:=REF(C,4)/REF(C,5)>1.091 AND REF(H,4)=REF(C,4) AND REF(L,4)<REF(O,4);
    QP2:=H/REF(C,1)>=1.041 AND O<REF(C,4);
    XG2:=QP1 AND QP2 AND ZHGY1 AND ZHGY2;
    WP1:=REF(C,5)/REF(C,6)>1.091 AND REF(H,5)=REF(C,5) AND REF(L,5)<REF(O,5);
    WP2:=H/REF(C,1)>=1.041 AND O<REF(C,5);
    XG3:=WP1 AND WP2 AND ZHGY1 AND ZHGY2;
    RP1:=REF(C,6)/REF(C,7)>1.091 AND REF(H,6)=REF(C,6) AND REF(L,6)<REF(O,6);
    RP2:=H/REF(C,1)>=1.041 AND O<REF(C,6);
    XG4:=RP1 AND RP2 AND ZHGY1 AND ZHGY2;
    ST:=IF(NAMELIKE('S'),0,1) AND IF(NAMELIKE('*'),0,1);
    停牌:=DYNAINFO(4)>0;
    QCST:=ST AND 停牌;
    双龙戏轴:(XG1 OR XG2 OR XG3 OR XG4) AND QCST;













    gd52334


    【下载地址隐藏】:                    点:回复可见地址
    游客,如果您要查看本帖隐藏内容请回复






    上一篇:「指标」封堵顶底主图指标 通达信 贴图
    下一篇:「指标」通达淮彩色筹码峰主图指标 源码 贴图
    回复

    举报

    QQ|

    GMT+8, 2024-11-14 13:39

    快速回复 返回顶部 返回列表