【资料名称】:缠买点 选股公式介绍
【资料描述】:
缠买点 选股公式
缠论买点公式再复合指标金叉概念选股棒极 一试为快!!!
特此奉献:
在趋势背驰、中枢延伸背驰、盘整背驰的三种形态转化中，能被缠定为常规指标：kdj\macd...等金叉认可的买点，价值才会高精准。
不妨用实践做个验证！
强力推荐！
{N1:1,100,10;N2:1,100,10;DISP:=1,3,2}
DISP:=2;
K:=IF(PERIOD=5,1,{日}
IF(PERIOD=6,1,{周}
IF(PERIOD=7,1,{月}
IF(PERIOD=8,1,{多分钟}
IF(PERIOD=9,1,{多日}
IF(PERIOD=10,1,{季}
IF(PERIOD=11,2,{年}
IF(PERIOD=4,1,{60F}
IF(PERIOD=3,1,{30F}
IF(PERIOD=2,1,{15F}
IF(PERIOD=1,1{5F},1{1F})))))))))))/10;
P1:=PEAK(1,K*10,1);
P2:=PEAK(1,K*10,2);
WP1:=PEAKBARS(1,K*10,1);
WP2:=PEAKBARS(1,K*10,2);
T1:=TROUGH(2,K*10,1);
T2:=TROUGH(2,K*10,2);
WT1:=TROUGHBARS(2,K*10,1);
WT2:=TROUGHBARS(2,K*10,2);
TJ1:=P1>T1 AND P2>T2 ;
ZD:=MAX(T1,T2);
ZG:=MIN(P1,P2);
LLA:=MIN(T1,T2);
HHA:=MAX(P1,P2);
TJ2:=FILTER(ZG>ZD,2);
TJ3:=ZG=REF(ZG,BARSLAST(TJ2)) OR ZD=REF(ZD,BARSLAST(TJ2));
TJ4:=TJ1&&TJ2&&NOT(TJ3);
TJ5:=BETWEEN(ZD,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ6:=BETWEEN(ZG,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ7:=ZG>REF(ZG,REF(BARSLAST(TJ4),1))&&ZD<REF(ZD,REF(BARSLAST(TJ4),1));
TJ8:=TJ4&&NOT(TJ5 OR TJ6 OR TJ7);
ZSD:=IF(TJ8,ZD,DRAWNULL);
ZSG:=IF(TJ8,ZG,DRAWNULL);
ZSH:=IF(TJ8,HHA,DRAWNULL);
ZSL:=IF(TJ8,LLA,DRAWNULL);
中枢高:=PLOYLINE(DISP=2,REF(ZSD,BARSLAST(TJ8)));
中枢低:=PLOYLINE(DISP=2,REF(ZSG,BARSLAST(TJ8)));
中枢最高:=PLOYLINE(DISP=2,REF(ZSH,BARSLAST(TJ8)));
中枢最低:=PLOYLINE(DISP=2,REF(ZSL,BARSLAST(TJ8)));
趋势高:=PLOYLINE(DISP=3,ZIG(1,K*10)),COLORLIBLUE;
趋势低:=PLOYLINE(DISP=3,ZIG(2,K*10)),COLORLIBLUE;
局部低点预选A:=BACKSET(LLV(L,5)<REF(LLV(L,4),1),4);
局部低点预选B:=BACKSET(局部低点预选A=0 AND REF(局部低点预选A,1)=1,2);
局部低点预选C:=IF(局部低点预选B=1 AND REF(局部低点预选B,1)=0,-1,0);
局部高点预选A:=BACKSET(HHV(H,5)>REF(HHV(H,4),1),4);
局部高点预选B:=BACKSET(局部高点预选A=0 AND REF(局部高点预选A,1)=1,2);
局部高点预选C:=IF(局部高点预选B=1 AND REF(局部高点预选B,1)=0,1,0);
缺口判断:=IF(L>REF(H,1),1,IF(H<REF(L,1),-1,0));
距前高天:=BARSLAST(局部高点预选C=1);
距前低天:=BARSLAST(局部低点预选C=-1);
小值周期:=LOWRANGE(L);
大值周期:=TOPRANGE(H);
低保留AA:=IF(局部低点预选C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留AB:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判断,距前高天)=-1 OR LLV(L,距前低天+2)<REF(LLV(L,距前低天+1),1)),-1,0);
低保留S:=IF((低保留AA=-1 OR 低保留AB=-1) AND L<REF(H,距前高天+1),-1,0);
预判:=IF((距前低天<4 AND HHV(缺口判断,距前低天)!=1) OR REF(低保留S,距前低天)=0,1,0);
判断:=IF(局部高点预选C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND 预判=1 AND 大值周期>REF(小值周期,距前低天+1) AND 大值周期>REF(小值周期,距前低天) AND 大值周期>REF(大值周期,距前高天),1,0);
高保留A:=IF(局部高点预选C=1 AND REF(距前低天,1)>REF(距前高天,1) AND HHV(H,距前低天+1)>REF(HHV(H,距前低天+1),1),1,0);
高保留B:=IF(局部高点预选C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND REF(低保留S,距前低天)=-1 AND (距前低天>=4 OR HHV(缺口判断,距前低天)=1),1,0);
高保留:=IF((高保留A=1 OR 高保留B=1 OR 判断=1) AND H>REF(L,距前低天+1),1,0);
预判A:=IF((距前高天<4 AND HHV(缺口判断,距前高天)!=1) OR REF(高保留,距前高天)=0,1,0);
判断A:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND 预判A=1 AND 小值周期>REF(大值周期,距前高天+1) AND 小值周期>REF(大值周期,距前高天) AND 小值周期>REF(小值周期,距前低天),-1,0);
低保留A:=IF(局部低点预选C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留B:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判断,距前高天)=-1 OR 判断A=-1),-1,0);
低保留:=IF((低保留A=-1 OR 低保留B=-1) AND L<REF(H,距前高天+1),-1,0);
距前高天A:=BARSLAST(高保留=1);
距前低天A:=BARSLAST(低保留=-1);
预判X:=IF((距前低天A<4 AND HHV(缺口判断,距前低天A)!=1) OR REF(低保留,距前低天A)=0,1,0);
判断X:=IF(局部高点预选C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND 预判X=1 AND 大值周期>REF(小值周期,距前低天A+1) AND 大值周期>REF(小值周期,距前低天A) AND 大值周期>REF(大值周期,距前高天A),1,0);
高保留XA:=IF(局部高点预选C=1 AND REF(距前低天A,1)>REF(距前高天A,1) AND HHV(H,距前低天A+1)>REF(HHV(H,距前低天A+1),1),1,0);
高保留XB:=IF(局部高点预选C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND REF(低保留,距前低天A)=-1 AND (距前低天A>=4 OR HHV(缺口判断,距前低天A)=1),1,0);
高保留X:=IF((高保留XA=1 OR 高保留XB=1 OR 判断X=1) AND H>REF(L,距前低天A+1),1,0);
预判XA:=IF((距前高天A<4 AND HHV(缺口判断,距前高天A)!=1) OR REF(高保留XA,距前高天A)=0,1,0);
判断XA:=IF(局部低点预选C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND 预判XA=1 AND 小值周期>REF(大值周期,距前高天A+1) AND 小值周期>REF(大值周期,距前高天A) AND 小值周期>REF(小值周期,距前低天A),-1,0);
低保留XA:=IF(局部低点预选C=-1 AND REF(距前高天A,1)>REF(距前低天A,1) AND LLV(L,距前高天A+1)<REF(LLV(L,距前高天A+1),1),-1,0);
低保留XB:=IF(局部低点预选C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND (距前高天A>=4 OR LLV(缺口判断,距前高天A)=-1 OR 判断XA=-1),-1,0);
低保留X:=IF((低保留XA=-1 OR 低保留XB=-1) AND L<REF(H,距前高天A+1),-1,0);
距前高天YA:=BARSLAST(高保留X=1);
距前低天YA:=BARSLAST(低保留X=-1);
预判YX:=IF((距前低天YA<4 AND HHV(缺口判断,距前低天YA)!=1) OR REF(低保留X,距前低天YA)=0,1,0);
判断YX:=IF(局部高点预选C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND 预判YX=1 AND 大值周期>REF(小值周期,距前低天YA+1) AND 大值周期>REF(小值周期,距前低天YA) AND 大值周期>REF(大值周期,距前高天YA),1,0);
高保留YXA:=IF(局部高点预选C=1 AND REF(距前低天YA,1)>REF(距前高天YA,1) AND HHV(H,距前低天YA+1)>REF(HHV(H,距前低天YA+1),1),1,0);
高保留YXB:=IF(局部高点预选C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND REF(低保留X,距前低天YA)=-1 AND (距前低天YA>=4 OR HHV(缺口判断,距前低天YA)=1),1,0);
高保留YX:=IF((高保留YXA=1 OR 高保留YXB=1 OR 判断YX=1) AND H>REF(L,距前低天YA+1),1,0);
预判YXA:=IF((距前高天YA<4 AND HHV(缺口判断,距前高天YA)!=1) OR REF(高保留YXA,距前高天YA)=0,1,0);
判断YXA:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND 预判YXA=1 AND 小值周期>REF(大值周期,距前高天YA+1) AND 小值周期>REF(大值周期,距前高天YA) AND 小值周期>REF(小值周期,距前低天YA),-1,0);
低保留YXA:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)>REF(距前低天YA,1) AND LLV(L,距前高天YA+1)<REF(LLV(L,距前高天YA+1),1),-1,0);
低保留YXB:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND (距前高天YA>=4 OR LLV(缺口判断,距前高天YA)=-1 OR 判断YXA=-1),-1,0);
低保留YX:=IF((低保留YXA=-1 OR 低保留YXB=-1) AND L<REF(H,距前高天YA+1),-1,0);
AAAD:=IF(高保留YX=1 AND 低保留YX=-1 AND H>REF(H,REF(距前高天YA,1)+2),1,IF(高保留YX=1 AND 低保留YX=-1 AND L<REF(L,REF(距前低天YA,1)+2),-1,0));
SCAA:=REF(IF(AAAD=0,高保留YX+低保留YX,AAAD),1)=-1;
N:=5;M:=3;
N1:=3;N2:=8;M1:=50;M2:=100;SM:=20;KS:=6;
AT:=C/FINANCE(33)<M1 AND C/FINANCE(33)>0 AND FINANCE(7)<10000000*M2;
{11111111111111111111111111. K??}
AC:=C;
AL:=L;
AH:=H;
AQ_1:=AC-REF(AC,1);
AQ_2:=100*EMA(EMA(AQ_1,6),6)/EMA(EMA(ABS(AQ_1),6),6);
AQ_3:=CROSS(EMA(AC,N2),EMA(AC,N1));
AQ_4:=CROSS(EMA(AC,N1),EMA(AC,N2));
AZ1:=AL=LLV(AL,BARSLAST(AQ_3)+1);
AZ2:=LLV(AL,BARSLAST(AQ_3)+1);
AZ3:=AH=HHV(AH,BARSLAST(AQ_4)+1);
AZ4:=HHV(AH,BARSLAST(AQ_4)+1);
AQ_A:=DRAWLINE(AZ1,AZ2,AZ3,AZ4,0);
AY1:=AH=HHV(AH,BARSLAST(AQ_4)+1);
AY2:=HHV(AH,BARSLAST(AQ_4)+1);
AY3:=AL=LLV(AL,BARSLAST(AQ_3)+1);
AY4:=LLV(AL,BARSLAST(AQ_3)+1);
AQ_B:=DRAWLINE(AY1,AY2,AY3,AY4,0);
TJA:=IF(AQ_B<REF(AQ_B,1) AND AQ_B=AQ_A,1,0),COLORLIGREEN;
{22222222222222222222222222222. ??}
VV:=IF(CURRBARSCOUNT=1 AND PERIOD=5,VOL*240/FROMOPEN,VOL);
TH:=SUM(IF(CLOSE>REF(CLOSE,1),VV,0),26);
TL:=SUM(IF(CLOSE<REF(CLOSE,1),VV,0),26);
TQ:=SUM(IF(CLOSE=REF(CLOSE,1),VV,0),26);
VVR:=100*(TH*2+TQ)/(TL*2+TQ);
MAVR:=EMA(VVR,6);
CC:=MAVR;
LL:=CC;
HH:=CC;
K_1:=CC-REF(CC,1);
K_2:=100*EMA(EMA(K_1,6),6)/EMA(EMA(ABS(K_1),6),6);
K_3:=CROSS(EMA(CC,N2),EMA(CC,N1));
K_4:=CROSS(EMA(CC,N1),EMA(CC,N2));
KZ1:=LL=LLV(LL,BARSLAST(K_3)+1);
KZ2:=LLV(LL,BARSLAST(K_3)+1);
KZ3:=HH=HHV(HH,BARSLAST(K_4)+1);
KZ4:=HHV(HH,BARSLAST(K_4)+1);
K_A:=DRAWLINE(KZ1,KZ2,KZ3,KZ4,0);
KY1:=HH=HHV(HH,BARSLAST(K_4)+1);
KY2:=HHV(HH,BARSLAST(K_4)+1);
KY3:=LL=LLV(LL,BARSLAST(K_3)+1);
KY4:=LLV(LL,BARSLAST(K_3)+1);
K_B:=DRAWLINE(KY1,KY2,KY3,KY4,0);
TJB:=IF(K_B<REF(K_B,1) AND K_B=K_A,1,0),COLORWHITE;
{333333333333333333333333333. ??"??·}
YR1:=LLV(LOW,21);
YR2:=HHV(HIGH,21);
YTK:=EMA((CLOSE-YR1)/(YR2-YR1)*100,6);
YTD:=EMA(0.667*REF(YTK,1)+0.333*YTK,2);
YR3:=LLV(LOW,55);
YR4:=HHV(HIGH,34);
YR5:=EMA((CLOSE-YR3)/(YR4-YR3)*100,3);
YR6:=(YTK+YR5)/2;
YR7:=EMA(0.667*REF(YR5,1)+0.333*YTK,2);
YR8:=EMA(YR6,5);
YR9:=EMA(0.667*REF(YR8,1)+0.333*YR8,2);
YV7:=SMA(C,6.18,1)*YTK;
VOV:=(YTK+YTD+YR6+YR8+YR9)*0.2;
YC:=VOV;
YL:=YC;
YH:=YC;
YQ_1:=YC-REF(YC,1);
YQ_2:=100*EMA(EMA(YQ_1,6),6)/EMA(EMA(ABS(YQ_1),6),6);
YQ_3:=CROSS(EMA(YC,N2),EMA(YC,N1));
YQ_4:=CROSS(EMA(YC,N1),EMA(YC,N2));
YZ1:=YL=LLV(YL,BARSLAST(YQ_3)+1);
YZ2:=LLV(YL,BARSLAST(YQ_3)+1);
YZ3:=YH=HHV(YH,BARSLAST(YQ_4)+1);
YZ4:=HHV(YH,BARSLAST(YQ_4)+1);
YQ_A:=DRAWLINE(YZ1,YZ2,YZ3,YZ4,0);
YY1:=YH=HHV(YH,BARSLAST(YQ_4)+1);
YY2:=HHV(YH,BARSLAST(YQ_4)+1);
YY3:=YL=LLV(YL,BARSLAST(YQ_3)+1);
YY4:=LLV(YL,BARSLAST(YQ_3)+1);
YQ_B:=DRAWLINE(YY1,YY2,YY3,YY4,0);
TJD:=IF(YQ_B<REF(YQ_B,1) AND YQ_B=YQ_A,1,0);
{44444444444444444444444444444. ????}
RC:=WINNER(C)*0.9*100-5;
RL:=RC;
RH:=RC;
RQ_1:=RC-REF(RC,1);
RQ_2:=100*EMA(EMA(RQ_1,6),6)/EMA(EMA(ABS(RQ_1),6),6);
RQ_3:=CROSS(EMA(RC,N2),EMA(RC,N1));
RQ_4:=CROSS(EMA(RC,N1),EMA(RC,N2));
RZ1:=RL=LLV(RL,BARSLAST(RQ_3)+1);
RZ2:=LLV(RL,BARSLAST(RQ_3)+1);
RZ3:=RH=HHV(RH,BARSLAST(RQ_4)+1);
RZ4:=HHV(RH,BARSLAST(RQ_4)+1);
RQ_A:=DRAWLINE(RZ1,RZ2,RZ3,RZ4,0);
RY1:=RH=HHV(RH,BARSLAST(RQ_4)+1);
RY2:=HHV(RH,BARSLAST(RQ_4)+1);
RY3:=RL=LLV(RL,BARSLAST(RQ_3)+1);
RY4:=LLV(RL,BARSLAST(RQ_3)+1);
RQ_B:=DRAWLINE(RY1,RY2,RY3,RY4,0);
TJE:=IF(RQ_B<REF(RQ_B,1) AND RQ_B=RQ_A,1,0);
{55555555555555555555555555555555555.SM20}
MS:=EMA(C,SM);
SL:=MS;
SH:=MS;
SQ_1:=MS-REF(MS,1);
SQ_2:=100*EMA(EMA(SQ_1,6),6)/EMA(EMA(ABS(SQ_1),6),6);
SQ_3:=CROSS(EMA(MS,N2),EMA(MS,N1));
SQ_4:=CROSS(EMA(MS,N1),EMA(MS,N2));
SZ1:=SL=LLV(SL,BARSLAST(SQ_3)+1);
SZ2:=LLV(SL,BARSLAST(SQ_3)+1);
SZ3:=SH=HHV(SH,BARSLAST(SQ_4)+1);
SZ4:=HHV(SH,BARSLAST(SQ_4)+1);
SQ_A:=DRAWLINE(SZ1,SZ2,SZ3,SZ4,0);
SY1:=SH=HHV(SH,BARSLAST(SQ_4)+1);
SY2:=HHV(SH,BARSLAST(SQ_4)+1);
SY3:=SL=LLV(SL,BARSLAST(SQ_3)+1);
SY4:=LLV(SL,BARSLAST(SQ_3)+1);
SQ_B:=DRAWLINE(SY1,SY2,SY3,SY4,0);
TJF:=IF(SQ_B<REF(SQ_B,1) AND SQ_B=SQ_A,1,0);
{6666666666666666666666666666666. "???·?????}
VVOLL:=VV/CAPITAL*100;
HR1:=LLV(LOW,21);
HR2:=HHV(HIGH,21);
HTK:=EMA((CLOSE-HR1)/(HR2-HR1)*100,6);
HV7:=SMA(C,6.18,1)*HTK;
DC:=HV7;
DL:=DC;
DH:=DC;
DQ_1:=DC-REF(DC,1);
DQ_2:=100*EMA(EMA(DQ_1,6),6)/EMA(EMA(ABS(DQ_1),6),6);
DQ_3:=CROSS(EMA(DC,N2),EMA(DC,N1));
DQ_4:=CROSS(EMA(DC,N1),EMA(DC,N2));
DZ1:=DL=LLV(DL,BARSLAST(DQ_3)+1);
DZ2:=LLV(DL,BARSLAST(DQ_3)+1);
DZ3:=DH=HHV(DH,BARSLAST(DQ_4)+1);
DZ4:=HHV(DH,BARSLAST(DQ_4)+1);
DQ_A:=DRAWLINE(DZ1,DZ2,DZ3,DZ4,0);
DY1:=DH=HHV(DH,BARSLAST(DQ_4)+1);
DY2:=HHV(DH,BARSLAST(DQ_4)+1);
DY3:=DL=LLV(DL,BARSLAST(DQ_3)+1);
DY4:=LLV(DL,BARSLAST(DQ_3)+1);
DQ_B:=DRAWLINE(DY1,DY2,DY3,DY4,0);
TJG:=IF(DQ_B<REF(DQ_B,1) AND DQ_B=DQ_A,1,0);
SCA:=TJA+TJB+TJD+TJE+TJF+TJG;
JB_CFA:=(HIGH+CLOSE)/2;
JB_CFB:=EMA(C,N);
JB_CFC:=EMA(JB_CFA,M);
JB_O30:=EMA(C,30);
JB_OPA:=AMOUNT/VV/100;
JB_OPB:=EMA(JB_OPA,N);
JB_OSC:=CROSS(JB_OPA,JB_OPB) AND JB_OPB>JB_O30 ;
JB_SCS:=SCA+JB_OSC;
JB_SSB:=CROSS(JB_SCS,6.5)AND SCA>REF(SCA,1) AND SCA=6 AND REF(SCA,1)<=6;
JB_MR_I:=CROSS(SCA,5.5) AND SCA>REF(SCA,1) AND SCA>=5 AND REF(SCA,1)<5;
JB_MR_II:=CROSS(SCA,4.5) AND SCA>REF(SCA,1) AND SCA>=4 AND REF(SCA,1)<4;
JB_MR_III:=JB_MR_I OR JB_MR_II;
JB_FJ:=L>REF(L,1) AND CROSS(C,EMA(C,5)) AND CROSS(C,EMA(C,10)) ;
JB_SSC:=JB_MR_I AND JB_FJ;
JB_SC1:=IF(SCA=6,1,0);
JB_SC2:=IF(SCA<6,1,0);
JB_MR:= SCA>=4 AND REF(SCA,2)<=6 AND (CROSS(JB_CFC,JB_CFB) OR CROSS(JB_CFC,EMA(C,30)) OR CROSS(JB_CFC,EMA(C,60)));
JB_SCB:=ZIG(3,5);
JB_SCC:=IF(JB_SCB>REF(JB_SCB,1),2,0);
JB_SSD:= CROSS(JB_SCC,1) AND CROSS(C,EMA(C,27)) OR JB_MR OR JB_SCB OR JB_SCC ;
JB_SCK5:=CROSS(SCA,5.5) AND REF(SCA,1)=5 AND REF(SCA,2)=5 AND REF(SCA,3)=5 AND REF(SCA,4)=5 AND REF(SCA,5)<=5;
JB_SCK4:=CROSS(SCA,5.5) AND REF(SCA,1)=5 AND REF(SCA,2)=5 AND REF(SCA,3)=5 AND REF(SCA,4)<5;
JB_SCK3:=CROSS(SCA,5.5) AND REF(SCA,1)=5 AND REF(SCA,2)=5 AND REF(SCA,3)<5;
JB_SCK2:=CROSS(SCA,5.5) AND REF(SCA,1)=5 AND REF(SCA,2)<5;
JB_SCK1:=CROSS(SCA,5.5) AND REF(SCA,1)<5 ;
JB_SCK0:=JB_SCK1 OR JB_SCK5 OR JB_SCK4;
JB_SCK9:=JB_SCK5 OR JB_SCK4 OR JB_SCK3 OR JB_SCK3 OR JB_SCK1;
JB_ZL_VO:=((CLOSE-MA(CLOSE,6))/MA(CLOSE,6)*100+(CLOSE-MA(CLOSE,24))/MA(CLOSE,24)*100+(CLOSE-MA(CLOSE,32))/MA(CLOSE,32)*100)/3;
JB_ZL_V1:=(C*2+H+L)/4*10;
JB_ZL_V2:=EMA(JB_ZL_V1,13)-EMA(JB_ZL_V1,34);
JB_ZL_V3:=EMA(JB_ZL_V2,5);
JB_ZL_V4:=2*(JB_ZL_V2-JB_ZL_V3)*5.5;
JB_ZL_V8:=(INDEXC*2+INDEXH+INDEXL)/4;
JB_ZL_V9:=EMA(JB_ZL_V8,13)-EMA(JB_ZL_V8,34);
JB_ZL_VA:=EMA(JB_ZL_V9,3);
JB_ZL_VB:=(JB_ZL_V9-JB_ZL_VA)/2;
JB_ZL_QJJ:=VOL/((HIGH-LOW)*2-ABS(CLOSE-OPEN));
JB_ZL_XVL:=(IF(CLOSE>OPEN,JB_ZL_QJJ*(HIGH-LOW),IF(CLOSE<OPEN,JB_ZL_QJJ*(HIGH-OPEN+CLOSE-LOW),VOL/2))+
IF(CLOSE>OPEN,0-JB_ZL_QJJ*(HIGH-CLOSE+OPEN-LOW),IF(CLOSE<OPEN,0-JB_ZL_QJJ*(HIGH-LOW),0-VOL/2)));
JB_ZL_HSL:=(JB_ZL_XVL/20)/1.15;
JB_ZL_VC:=((JB_ZL_HSL*0.55+(REF(JB_ZL_HSL,1)*0.33))+(REF(JB_ZL_HSL,2)*0.22))*0.1;
JB_ZL_SC:=CROSS(JB_ZL_VC,0) AND (CROSS(JB_ZL_VO,JB_ZL_V4) OR CROSS(JB_ZL_VO,JB_ZL_VB) OR CROSS(JB_ZL_VO,0) OR
CROSS(JB_ZL_V4,JB_ZL_VB) OR CROSS(JB_ZL_V4,O) OR CROSS(JB_ZL_VB,0) OR CROSS(JB_ZL_VC,JB_ZL_VO));
DPXX_GL:= INDEXC;
DPXX_DIF:=100*(EMA(DPXX_GL,5)-EMA(DPXX_GL,9))/DPXX_GL;
DPXX_DEA:=EMA(DPXX_DIF,3);
DPXX_AC:=DPXX_DEA;
DPXX_AL:=DPXX_AC;
DPXX_AH:=DPXX_AC;
DPXX_AQ_1:=DPXX_AC-REF(DPXX_AC,1);
DPXX_AQ_2:=100*EMA(EMA(DPXX_AQ_1,6),6)/EMA(EMA(ABS(DPXX_AQ_1),6),6);
DPXX_AQ_3:=CROSS(EMA(DPXX_AC,N2),EMA(DPXX_AC,N1));
DPXX_AQ_4:=CROSS(EMA(DPXX_AC,N1),EMA(DPXX_AC,N2));
DPXX_AZ1:=DPXX_AL=LLV(DPXX_AL,BARSLAST(DPXX_AQ_3)+1);
DPXX_AZ2:=LLV(DPXX_AL,BARSLAST(DPXX_AQ_3)+1);
DPXX_AZ3:=DPXX_AH=HHV(DPXX_AH,BARSLAST(DPXX_AQ_4)+1);
DPXX_AZ4:=HHV(DPXX_AH,BARSLAST(DPXX_AQ_4)+1);
DPXX_AQ_A:=DRAWLINE(DPXX_AZ1,DPXX_AZ2,DPXX_AZ3,DPXX_AZ4,0);
DPXX_AY1:=DPXX_AH=HHV(DPXX_AH,BARSLAST(DPXX_AQ_4)+1);
DPXX_AY2:=HHV(DPXX_AH,BARSLAST(DPXX_AQ_4)+1);
DPXX_AY3:=DPXX_AL=LLV(DPXX_AL,BARSLAST(DPXX_AQ_3)+1);
DPXX_AY4:=LLV(DPXX_AL,BARSLAST(DPXX_AQ_3)+1);
DPXX_AQ_B:=DRAWLINE(DPXX_AY1,DPXX_AY2,DPXX_AY3,DPXX_AY4,0);
DPXX_TJA:= IF(DPXX_AQ_B<REF(DPXX_AQ_B,1) AND DPXX_AQ_B=DPXX_AQ_A,1,0);
TJC:=DPXX_TJA=1 AND DPXX_DIF>DPXX_DEA;
XLZ:=ATAN((SYS_DAY /REF(SYS_DAY ,1)-1)*100)*180/3.1416 ;
SSA:JB_SCK1 AND (JB_SSD OR JB_ZL_SC) AND TJC AND XLZ>0 AND SCAA;
gd36540
【下载地址隐藏】： 点：回复可见地址 
